55
(Continued)
Bluetooth
®
Pairing cannot be completed.
• Check the Bluetooth
®
device condition.
The device cannot be connected.
• The pairing of the device was unsuccessful or the
registration has been replaced. Try re-pairing the
device. (⇒ 33)
• This unit might be connected to a different device.
Disconnect the other device and try re-pairing the
device.
The device is connected, but audio cannot be
heard through this unit.
• For some built-in Bluetooth
®
devices, you have
to set the audio output to this unit manually.
Read the operating instructions for the device for
details.
The sound is interrupted.
• The device is out of the 10 m communication
range. Bring the Bluetooth
®
device closer to this
system.
• Remove any obstacle between this system and the
device.
• Other devices that use the 2.4 GHz frequency
band (wireless router, microwaves, cordless
phones, etc.) are interfering. Bring the Bluetooth
®
device closer to this system and distance it from
the other devices.
• Switch the transmission mode of this unit, and it
can be set by using the free app “Technics Audio
Center”.
To Next Page
Loading...
Need help?
General
