English - 7 -
Turning On/Off the TV
Connect power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket.
mains.
To switch on the TV from standby
standby mode the standby LED lights
Press the Standby button on the remote control.
To switch the TV into standby
Press the Standby button on the remote control.
on the Inputs
until the
into standby mode.
cord from the mains socket.
TV Control & Operation
Note: The position of the control button may dier depending
on the model.
Operating with the Control Button
Press and hold the button for about 2 seconds to use
Inputs
the
To turn on the TV:
will turn on.
To change volume:
consecutively to move the focus to Volume Up or
Volume Down
increase or decrease the volume.
To change channel (in Live TV mode): Press the
focus to Channel Up or Channel Down
channel in the channel list.
To change input:
Inputs
and hold the button for about 2 seconds to switch to
Note: Live TV settings menu OSD in Live TV mode cannot be
displayed via the control button.
Operation with the Remote Control
Press and hold the Home button on your remote
Home
Select to make selections in
Return/
Back
Input Selection
Once you have connected external systems to your
and hold the Home button on your remote control to
highlight the Inputs Select
Select button to switch to
the InputsSelect.
Changing Channels and Volume
You can adjust the volume by using the Volume
+/-
by using the Programme +/- buttons on the remote.
To Next Page
Loading...
Need help?
General