Example: Error message type, output 1 dominant OFF, output 2 dominant ON, warning tone
activated, output for warning tone: output 12.
After the message has been triggered and the cause of the fault has ceased to exist, the following
display appears (red):
If the message window has been hidden, it can be redisplayed by tapping the warning symbol in
the status line.
Example: Fault message type, output 1 dominant OFF, output 2 dominant ON, warning tone
activated, output for warning tone: output 12.
After the message has been triggered and the cause of the fault has ceased to exist, the following
display appears (red):