TECO JSDAP Series Simplified Manual

3
1-1-3 Servo motor Model Code display
dn-08 (Servo motor Model Code display)
Use dn-08 to display servo motor code and check the servo drive and motor compatibility according to the
table below. If the collocation is discordant with that dn08 presented, reset parameter Cn030 or contact your
supplier. The motor model code is stored in parameter Cn030.
200V
dn-08 Display
Drive Model
JSDAP
Motor Model
Motor Standards
Encoder
Specification
Cn030 Setting Watt(KW) Speed(rpm)
H1011
10A(1)
JSMA-(P)SCP5AB
0.05 3000
2500
H1015 JSMA-PSCP5A5 15 bit(ABS)
H1017 JSMA-PSCP5A7 17 bit
H101A JSMA-PSCP5AA 17 bit(ABS)
H1021 JSMA- (P)SC01AB
0.1 3000
2500
H1025 JSMA-PSC01A5 15 bit(ABS)
H1027 JSMA-PSC01A7 17 bit
H102A JSMA-PSC01AA 17 bit(ABS)
H1101
15A(1)
JSMA-PSC02AB
0.2 3000
2500
H1102 JSMA-PSC02AH 8192
H1105 JSMA-PSC02A5 15 bit(ABS)
H1107 JSMA-PSC02A7 17 bit
H110A JSMA-PSC02AA 17 bit(ABS)
H1111 JSMA- (P)SC01AB
0.1 3000
2500
H1115 JSMA-PSC01A5 15 bit(ABS)
H1117 JSMA-PSC01A7 17 bit
H111A JSMA-PSC01AA 17 bit(ABS)

TECO JSDAP Series Specifications

General

Brand	TECO
Model	JSDAP Series
Category	Servo Drives
Language	English