Tektronix 2215A Operator's Instruction Manual

CHANNEL 1 HORIZONTAL ---.J CHANNEL 2
(REFERENCE )) DIFFERENCE r (REFERENCE)
I ~.-..' ~-+-~ --~
101--+ -+-- t--t - -l::- -+--4 - -+ - +----i
o . ·c H 1 SIGNAL ..
+---+--+--+--+-"'f- -~ A FOR CH 1
ALT HORIZ SWEEP
DISPLAY
B FOR CH2
'VERTICAL REFERENCE
LINE
4732-13
Figure 4-15. Time difference between two pulses on two time-
related signals.
Operating Procedures-2215A Operators
11. Calculate the ti me difference between the Channel 1
and Channel 2 pulses as in the preceding ' Time Difference
On Single Waveforms· measurement procedure.
EXAMPLE: With the A SEC/DIV switch set to 50 µs per
division, the dial reading for the reference pulse (Channel 1)
is 2.60 and the dial reading for the comparison pulse (Chan-
nel 2) is 7.10.
Substituting the given values i nto the time-difference
formula:
Time Difference = (7.10 - 2.60) (50 µs/di v) = 225 µs
4- 13

Tektronix 2215A Specifications

General

Brand	Tektronix
Model	2215A
Category	Test Equipment
Language	English