Tektronix AFG1000 Series User Manual

18
AFG1000 Series Quick Start User Manual
Instrument front panel, interface, and rear panel
Select waveform
The instrument can provide five standard waveforms (Sine, Square, Ramp,
Pulse and Noise). The instrument can also provide user-defined arbitrary
waveforms. You can create, edit, and save your custom waveforms.
You can also create modulated waveforms using the Mod panel button and then
Mod bezel button menus. The following table shows the combination of
modulation type and the shape of the output waveform.
Modulation, sweeping, and burst modes are only available in Ch1 on AFG1022.
AFG1022
Sine,
Square,
Ramp
Pulse Noise Arb
AM
√
√
FM
√
√
PM
√
√
FSK
√
√
Sweep
√
√
Burst
√
√
√
Continuous
√
√
√
√
AFG1062
Sine,
Square,
Ramp
Pulse Noise Arb
AM
√
√
FM
√
√
PM
√
√
PWM
√
FSK
√
√
ASK
√
√
PSK
√
√
Sweep
√
√
Burst
√
√
√
Continuous
√
√
√
√

Tektronix AFG1000 Series Specifications

General

Brand	Tektronix
Model	AFG1000 Series
Category	Inverter
Language	English