Operating basics
Generate a Pul
se Wa veform
1. Push the front-panel
Pulse button to display
the Pulse screen.
2. Push the
Frequency/Period
shortcut button to select
Frequency or Period.
3. Push the Duty/Width
shortcut b
utton to
toggle between Duty
and Width.
4. Push the
Leading/Trailing
shortcut button to
toggle th
e parameters
for Leading Edge and
Trailing Edge.
5. You can s
et the lead delay by pushing the Phase | Delay shortcut button to display the
lead delay setting screen and adjusting the parameter as needed. You can also select
Lead Delay from the bezel menu.
Pulse waveform formulas
The following formulas are applied to leading edge time, trailing edge time, pulse
period, and pulse width of pulse waveforms.
lEdge (Leading Edge Time)
tEdge (Trailing Edge Time)
AFG3000 and AFG3000C Series User Manual 45
To Next Page
Loading...
Need help?
General