To Next Page

To Previous Page

Operating basics

Invert Wavefo

rm Polarity

To invert a waveform polarity, use the Output menu. The following example

shows how to get a differential signal using the invert function of dual channel

model:

1. Select the CH1

waveform.

2. Push the front-panel

Frequency/Period button.

3. Push the Fr

equency

bezel button to set the

CH1 frequency.

4. Select the

third bezel

button from the top to

set the two channel

frequenc

ies to the same

value.

5. Push the front-panel

Channel Select button to

select C

H2.

6. Push the Output Menu

> Invert bezel buttons to

invert

the CH2 wave form.

7. Push the front-panel

CH1 Output On button to

enab

le the output.

8. You can get a differential

signal.

AFG3000 and AFG3000C Series User Manual 69

Tektronix AFG3011C User Manual

Other manuals for Tektronix AFG3011C