Pinpoint Trigge
rs
Trigger Type Trigger Condit
ions
State Trigger when a
ll of the logic inputs to the selected logic function cause the function to
be True or False when the clock input changes state.
Setup/ Hold Trigger when a logic input changes state inside of the setup and hold times relative
to the clock. The mode triggers on a setup and hold violation.
Comm
Trigger in conjunction with mask testing on communications codes and standards.
The controls work together to de fine the parameters for the trigger event (available
with Option
MTM or MTH). This mode includes clock recovery. Push the Push Set
50% knob to reinitialize clock recovery.
Video
Trigger on specified fields or lines of a composite video signal. Only composite
signal formats are supported.
SPI Trigger on Serial Peripheral Interface (SPI) signals.
I
2
C Trigger on Inter-IC Control (I
2
C) signals: start, stop, repeated start, missing
acknowle
dge, address, data, and address and data.
RS-232 Trigger
on RS-232 signals.
CAN Trigger on CA N Bus signals.
DPO7000 Series and DPO/DSA70000/B Series Quick Start User Manual 51
To Next Page
Loading...
Need help?
General
