Commands Listed in Alphabetical Order
Examples
MEASUREMENT:I
MMED:VALUE?
might return :MEASUREMENT:IMMED:VALUE
9.9000E+37.
If the measurement has an error or warning associated with it,
then an item is added to the error queue. The error can be checked for with the
*ESR? and ALLEv? commands.
MEASUrement:INDICators? (Query Only)
Returns all measurement indicator parameters.
Group
Measurement
Syntax
MEASUrement:INDICators?
Examples
MEASUREMENT:INDICATORS? might return
MEASUREMENT:INDICATORS:STATE MEAS
1;NUMHORZ 0;NUMVERT 4;HORZ1
7.5E0;HORZ2 -3.400000095367E0;HORZ3 0.0E0;HORZ4 0.0E0;VERT1
-6.351123E-6;VERT2 -3.179753E-6;VERT3 -6.40943E-6;VERT4
-6.403E-6
MEASUrement:INDICators:HORZ<x>? (Query Only)
Returns the position of the specified horizontal measurement indicator <x>, where
<x> can be 1, 2, 3, or 4.
Group
Measurement
Syntax
MEASUrement:INDICators:HORZ<x>?
Examples
MEASUREMENT:INDICATORS:HORZ1? might return
MEASUREMENT:INDICATORS:HORZ1 -2.0E-3 indicating that horizontal
indicator1 has a value of -2mV.
MEASUrement:INDICators:NUMHORZ? (Query Only)
Returns the number of horizontal measurement indicators currently being
displayed.
Group
Measurement
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-431
To Next Page
Loading...
Need help?
General
