Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Syntax
WFMOutpre:PT_
Off?
Related Commands
DATa:SOUrce
Arguments
Arguments are ignored.
Examples
WFMOUTPRE:PT_OFF? might return WFMOUTPRE:PT_OFF 0.
WFMOutpre:PT_ORder? (Query O nly)
This query returns the point ordering, which is always linear (included for
compatibility with other Tektronix oscilloscopes).
(See page 2-95, Waveform Transfer Command Group.)
(See page D-1, Wa veform Transfer (WFMOutpre and CURVe Query) Exampl
es.)
Group
Waveform Transfer
Syntax
WFMOutpre:PT_ORder?
Related Commands
DATa:SOUrce
Examples
WFMOUTPRE:PT_ORDER? returns :WFMOUTPRE:PT_ORDER LINEAR.
WFMOutpre:REFLEvel? (Query Only)
This query returns the Reference Level of the outgoing waveform. It appliesonly
to the four frequency domain waveforms (RF Normal, RF Average, RF Max Hold,
and RF Min Hold). The units are in watts.
Conditions
MDO3000, MDO4000/B, or MDO4000C models with option SA3 or SA6 only.
Group
Waveform Transfer
Syntax
WFMOutpre:REFLEvel?
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-967

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English