Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Group
ARB
Syntax
AFG.ARBitrary.EMEM.POINTS.BYTEORDer <LSB> |<MSB>
AFG.ARBitrary.EMEM.POINTS.BYTEORDer?
Arguments
LSB – Least significant byte first (little endian)
MSB – Most significant byte first (big endian)
AFG:ARBitrary:EMEM:POINTS:ENCdg
This command specifies the data encoding format for the AFG:ARBitrary:EMEM:
POINTS query (either ASCII or binary).
The default is ASCii. This setting is non-volatile and is reset by default setup
or TekSecure.
Refer to the AFG:ARBitrary:EMEM:POINTS command description for more
information.
Conditions
MDO3000 series with option MDO3AFG installed and MDO4000C series with
option MDO4AFG installed only.
Group
ARB
Syntax
AFG:ARBitrary:EMEM:POINTS:ENCdg {ASCii|BINary}
AFG:ARBitrary:EMEM:POINTS:ENCdg?
Arguments
ASCii –ASCIINR3format
BINary – IEEE488.2 binary block in 4-byte floating point format.
Examples
AFG:ARB:EMEM:POINTS:ENC ASC sets the data encoding format for the
:AFG:ARBitrary:EMEM:POINTS? querytoASCII.
AFG:FREQuency
Sets (or queries) the AFG frequency, in Hz. The following frequency values
canbesetforeachAFGfunction(usethecommandAFG:FUNCtion to select a
function):
2-130 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English