Commands Listed in Alphabetical Order
EQual sets the l
abel qualifier to equal.
UNEQual sets the label qualifier to not equal.
LESSEQual sets the label qualifier to less than or equal.
MOREEQual sets the label qualifier to greater than or equal.
INrange sets the label qualifier to in range.
OUTrange sets the label qualifier to out of range.
NOTE. If the trigger condition is set to LABELANDDATA, the label qualifier will
be locked to EQual until the trigger condition is changed again.
Examples
TRIGger:A:BUS:B<x>>:ARINC429A:LABel:QU ALifier LESSthan sets
the label qualifier to less than.
TRIGger:A:BUS:B<x>:ARINC429A:LABel:QUA Lifier? might return
EQUAL indicating the label qualifier is set to =.
TRIGger:A:BUS:B<x>:ARINC429A:LABel:VALue
This command specifies the low value to be used when triggering on the
ARINC429 bus label field. The trigger condition must be set to LABel or
LABELANDDATA (using TRIGger:A:BUS:B<x>:ARINC429A:CONDition).
The default is all X's (don't care). B<x> is the bus number.
Conditions
This command requires installation of a DPO4AERO application module for
MDO4000C models, or MDO3AERO for MDO3000 models.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:ARINC429A:LABel:VAL ue <QString>
TRIGger:A:BUS:B<x>:ARINC429A:LABel:VAL ue?
Related Commands
TRIGger:A:BUS:B<x>:ARINC429A:CONDition
TRIGger:A:BUS:B<x>:ARINC429A:LABel:HIVALue
TRIGger:A:BUS:B<x>:ARINC429A:LABel:QUALifier
Arguments
QString is a quoted string of 8 bits. The allowable characters are 0, 1, and X.
The bits specified in the quoted string replace the least significant bits, leaving
any unspecified upper bits unchanged.
2-780 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
