Save setup
The Save Setup action saves the current oscilloscope settings to a file named
TEKnnnn.SET in a specified folder, or in nonvolatile setup memory. A setup file
contains an ASCII text string that lists the oscilloscope settings.
Options Settings or submenus Comments
Save To Setup Saves the current oscilloscope settings to a
location in the nonvolatile setup memory
File Saves the current oscilloscope settings to a file
on the USB flash drive
Setup 1 to 10 Specifies which nonvolatile setup memory
location to save to
Select Folder Lists the contents of the current USB flash drive
folder
Change Folder See File management conventions on page 63
and File utilities for the USB flash drive on
page 110.
New Folder
Save filename (such as
TEK0000.SET)
Saves the settings to the automatically
generated file name in the current USB flash
drive folder
When the print button option is set to Saves All to Files, the oscilloscope saves
oscilloscope setup files to a USB flash drive when you push the Save button. See
Saves all to files on page 65.
Save waveform
The Save Waveform action saves the specified waveform to a file named
TEKnnnn.CSV, or to reference memory. The oscilloscope saves waveform data
to files as "comma separated values" (.CSV format), which are ASCII text strings
that list the time (relative to the trigger) and amplitude values for each of the
2500 waveform data points. You can import .CSV files into many spreadsheet
and math analysis applications.
Options Settings or submenus Comments
Save To File Specifies to save the source waveform data to a
file on a USB flash drive
Ref Specifies to save the source waveform data in
reference memory
Source
3
Ch(x), Ref(x), Math Specifies which source waveform to save
To Ref(x) Specifies the reference memory location in
which to save the source waveform
3
Waveform must be displayed to save it as a reference waveform.
Reference
98 TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
