Self Calibration. The self calibration routine optimizes the oscilloscope accuracy
for the ambient temperature. For maximum accuracy, perform a self cal if the
ambient temperature changes by 5 °C (9 °F ) or more. For accurate calibration,
power on the oscilloscope and wait twenty minutes to ensure it is warmed up.
Follow the directions on the screen.
Factory calibration uses externally-generated voltages, and requires specialized
equipment. The recommended interval is one year. See Contacting Tektronix on
the copyright page for information on having Tektronix perform a Factory
Calibration of your oscilloscope.
File utilities for the USB
flash drive
One folder is always designated as the current folder. The current folder is the
default location to save and recall files.
You can use the File Utilities menu to do the following tasks:
■
List the contents of the current folder
■
Select a file or folder
■
Navigate to other folders
■
Create, rename, and delete files and folders
■
Format a USB flash drive
Options Comments
Change Folder Navigates to the selected USB flash drive folder. Use the multipurpose
knob to select a file or folder, then select the Change Folder menu option.
To return to the previous folder, select the ↑Up folder item and then
select the Change Folder menu option.
New Folder Creates a new folder in the current folder location, named NEW_FOL,
and displays the Rename menu for changing the default folder name.
Rename (filename or
folder)
Displays the Rename screen to rename a folder or file, described next.
Delete (filename or
folder)
Deletes the selected file name or folder; a folder must be empty before
you can delete it.
Confirm Delete Displays after pressing Delete, to confirm a file delete action. Pressing
any button or knob other than Confirm Delete cancels the file delete
action.
Format Formats the USB flash drive; this deletes all data on the USB flash drive.
Update Firmware Follow the on-screen directions to set up and push the Update Firmware
option button to start updating firmware.
Rename File or Folder. You can change the names of files and folders on a USB
flash drive.
Reference
110 TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual