Cleaning
General care
Do not store or leave the oscilloscope where the LCD display will be exposed to
direct sunlight for long periods of time.
CAUTION. To avoid damage to the oscilloscope or probes, do not expose them to
sprays, liquids, or solvents.
Cleaning
Inspect the oscilloscope and probes as often as operating conditions require. To
clean the exterior surface, perform the following steps:
1. Remove loose dust on the outside of the oscilloscope and probes with a lint-
free cloth. Use care to avoid scratching the clear glass display filter.
2. Use a soft cloth dampened with water to clean the oscilloscope. Use an
aqueous solution of 75% isopropyl alcohol for more efficient cleaning.
CAUTION.
To avoid damage to the surface of the oscilloscope or probes, do not
use any abrasive or chemical cleaning agents.
TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual 137
To Next Page
Loading...
Need help?
General
