Check the version of the
latest available firmware
1. Open up a Web browser and go to www.tektronix.com/software.
2. Enter “TBS1000B” in the search box.
3. Scan the list of available software for the latest TBS1000B firmware. Check
the version number.
If the latest available
firmware is newer than
that on your TBS1000B
update your product
firmware
1. Download the latest firmware from www.tektronix.com/software to your PC.
Unzip the files, if needed, and copy the designated firmware file into the root
folder of a USB flash drive.
2. Insert the USB flash drive into the front-panel USB port on your
oscilloscope.
3. Push Utility ► - more - page 1 of 2 ► File Utilities ► - more - page 1 of
2 ► Update Firmware ► Update Firmware
It takes several minutes to update the firmware. Your oscilloscope will prompt
you when the update is complete. Do not remove the USB flash drive or power
off the oscilloscope until the firmware update is complete.
Getting started
8 TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
