Getting Acquain
ted With Your Instrument
Setting Line Select Mode
To Toggle Line
Select Mode
1. Select the measurement display for
which you want to set the Line Select
mode.
2. Press the LINE SEL button to toggle
Line Select mode On or Off. When On, it
displays the line information.
3. Press the left or right arrow key to select
F1 (field 1), F2 (field 2), or All.
4. The line and field information will appear
at the bottom of the display screen.
5. Turn the GENERAL knob to select the
line you want to view.
24 WFM4000 and WFM5000 Waveform Monitors User Manual
To Next Page
Loading...
Need help?
General
