Getting Acquain
ted With Your Instrument
Adjusting Headphone Volume and Source
When an audio tile is active, the headphone volume can be adjusted using the H orizontal knob. To adjust the audio source,
perform the following procedure.
NOTE. The headphone icon appears at the bottom of the Audio display.
WARNING. To avoid hearing damage, always turn the volume down to the minimum before you put on headphones,
and then turn it up slowly.
1. Press the AUDIO button to bring up the
audio display or make an existing audio
display active in 4-Tile mode.
2. Press and hold the AUDIO button to
display the Audio menu.
3. Select Phase/Headphone Pair, and
then select the headphone source of
your choice.
28 WFM4000 and WFM5000 Waveform Monitors User Manual
To Next Page
Loading...
Need help?
General
