Tenda AC9 User Manual

3
Get to Know Your Router
3 Buttons & Interfaces
Button/Interface
Description
Power DC-IN
This interface is used to connect to the included power adapter of the router for power supply.
WPS
Press and hold it for a second and then release it to enable the WPS feature; please enable
the wireless device’s WPS feature to establish WPS connection within 2 minutes.
WiFi
Press and then release it to enable/disable WiFi.
Reset
Use the end of a paper clip or a similar object to press and hold this button for about 8 seconds
until all the LEDs light up and then release it to restore factory settings.
Internet
This port is used to connect to the Internet via an Ethernet cable.
Off
5GHz WiFi is disabled.
WPS
Solid
WPS is enabled.
Blinking
The Router is performing WPS negotiation to a client device.
Off
WPS is disabled.
USB
Solid
A USB device is well-connected and ready.
Blinking
Data is being transmitted.
Off
No USB device is detected, or USB device is ejected safely.

Tenda AC9 Specifications

General

Color	black
Wi-Fi Speed	1167 megabits per second
Frequency Band	2.4 ghz, 5.0 ghz
Ethernet Standard	10/100/1000
Ethernet Switch	yes
Wireless Standard	ac, n
Gigabit Ethernet Speed	yes
Antennas	2
Firewall	none
Data Encryption	yes
Encryption Type	wpa, wpa2, wpa-psk, wpa2-psk
Ports	rj-45, usb
LAN Ports	4
WAN Ports	1
Built In Modem	yes

Weight and Dimensions

Height	3 inches
Width	8.9 inches