Tenda C5 User Manual

Super easy IP Camera
56
5.3.6.4 FTP setting
The device will snap live pictures and send them to FTP server when alarming, but need to
set the FTP setting correctly. As shown below, after the setting is finished, click “Test” to
check your settings are correct or not.
Note：For using the FTP function, you need to apply a user with authority that you can write
and create submenu and some memory space.
5.3.7 System settings
5.3.7.1 User setting
5.3.7.2 Device date and time settings
You can enable “Sync with NTP Server” when the device was connected to WAN, but need
to select correct time zone where the camera is located, otherwise need to select“ Sync with PC
time”.

Tenda C5 Specifications

General

Brand	Tenda
Model	C5
Category	Security Camera
Language	English