Creation: 01.31 - 2014 2-1-11
(2) Battery Care
(a) Maintain battery in fully charged condition.
(b) Ensure battery is fastened securely to prevent damage.
(c) Maintain battery fluid at the proper level.
(d) Keep the battery terminal posts and clamps clean.
(3) Liquid Level
The electrolyte level in each cell should be above the plates at all times to prevent battery
failure. When the electrolyte level is low, add pure distilled water. Do not use hydrant water
or any water that has been in contact with a metal container.
I. Cables and Cable Heads
(1) Cables
Inspect cable for any insulation damage, frayed copper, and any overheated areas. If any of these
are found, the cable should be replaced.
(2) Cable Plugs
(a) Inspect the plug for wear. Replace it as needed.
(b) Inspect the sockets in the plug for wear, evidence of arcing, and burn marks. Replace plug
assembly as needed.
(c) Verify that the bolts holding cables to the plug are tight
WARNING:
NEVER ALLOW SPARKS OR OPEN FLAME TO COME NEAR
THE BATTERY. AVOID SPILLING ELECTROLYTE ON HANDS
OR CLOTHING.
CAUTION:
ALL GPU POWER CABLES AND HEADS WEAR OUT OVER TIME.
FAILURE TO INSPECT CABLES AND HEADS CAN LEAD TO UNIT,
Property of American Airlines
To Next Page
Loading...
