Recording a track
You can record a track while you drive, with or without a route planned. After recording, you can
then export your track so that you can share it with others. Alternatively, you view it using TomTom
MyDrive if you’re logged in to TomTom MyDrive on your device.
To record a track, do the following:
1.
In the Main Menu, select Start Recording.
A red dot appears in the lower right-hand corner of the screen and initially flashes 3 times to
show tha
t you are now recording. The dot remains on the screen until you stop recording.
2.
To stop recording, select Stop Recording in the Main Menu.
3.
Enter a name for your track or you can leave it at the suggested date-time combination.
4.
Select Add or Finished, depending on the device you are using.
5.
Your track is saved in My Routes.
Navigating using a track
You can import tracks on to your TomTom GO CLASSIC using TomTom MyDrive. To navigate using
an
imported track, do the following:
1.
In the Main Menu, select My Routes.
2.
Select a track from your list.
The track route is shown on the map view.
Note: You can export tracks as GPX files and save them on a memory card for sharing with
others.
Tip: To update the saved route in your My Routes list with the changes, select the route om
the map then select Save Changes to Route in the pop-up menu.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
