When the correct street name appears in the list, select the name.
6.
Enter the house number.
7.
Select Drive/Ride depending on which device you are using.
A route is planned and then guidance to your destination begins. As soon as you start driving,
the guidance view is shown automatically.
Planning a route to a POI
STEP BY STEP SEARCH ONLY
Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route to a POI type or a specific POI using search, do the following:
1.
Select the Main Menu button to open the Main Menu.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the arrival information panel. The estimated
time of arrival is the local time at your destination.
Tip: You can add a stop to a route that you have already planned.
Tip: You can save a route using My Routes.
Tip: If the house number does not exist then it appears red. The nearest house number is then
shown in the Drive to button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
