Planning a route in advance
You can plan a route in advance before you drive it. You can save the route as part of your My
Routes list.
To plan a route in advance, do the following:
1.
Search for the location you want to use as a starting point.
2.
Select Show on Map.
3.
Select the pop-up menu button.
A pop-up menu shows a list of options.
4.
Select Use as Starting Point.
5.
Search for the location you want to use as your destination.
6.
Select Show on Map.
7.
Select Drive/Ride in the pop-up menu.
Your route is planned using your chosen starting point and destination. The estimated journey
time is shown at the top of the route bar.
8.
To drive to the starting point, select Drive/Ride at the top of the screen.
The starting point of the route is converted to your first stop and then the route is planned.
Guidance to your destination begins from your current location. As soon as you start driving, the
guidance view is shown automatically.
C
hanging the starting point to be your current location
1.
Select the starting point of the route in the map view.
2.
Select the pop-up menu button.
Tip: Stops, POIs and Places can all be selected as starting points using their pop-up menus.
Tip: You can save the route in My Routes
.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and
the time difference in hours and half hours in the arrival information panel. The estimated
time of arrival is the local time at your destination.
Tip: You can add a stop to a route that you have already planned.
Tip: You can save a route using My Routes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
