56
another server that is used to re-stream existing stream in multicast format.
Use Sub-Node IP Address* This is a special parameter that allows the set-top-box to connect to
an intermediary server when multicast-to-unicast video stream conversion is required.
Sub-Node IP Address* This parameter is used to define the IP address of the multicast-to-
unicast conversion server.
Upstreaming Management Section*
Upstreaming Status* This parameter enables and disabled the video upstream form
camera feed or video files.
Video Source* This parameter is used to configure the outbound video streaming
format.
Bit Rate* This is the bit rate that is used for the video upstream.
Resolution* This parameter is the resolution that is used for the upstream video.
Apply Saves the configuration changes.
5.1.11. User Objects
User Objects functionality allows users to define their own objects. The defined objects will appear in the
User selections of the IPTV, VOD, PPV, and Audio sections of the device interface. For example, user can
define local files on this USB Driver or remote files on the Web (example: usb://file.avi or
http://server_ip/media.mp3)
To Next Page
Loading...
Need help?
General