67
indicator. If disabled the device will not display via LED or SIP protocol the MWI (Message Wait
Indicator) to notify the user that there is a new message left in the Voice-mail.
Enable Distinctive Ringing The device offers custom ring tone functionality that allows
CallerID -based ringing. If a caller is identified from within the Phone Book and has a custom ring
associated with the Phone Book entry the device will produce a custom ring tone. If this option is disabled
the device will not produce custom ring tones.
Accept Anonymous Calls Allows the device to accept calls from without a caller ID
(anonymous calls)
Enable Do-Not-Disturb This function will allow the device to be put in DND (Do-Not-
Disturb) mode. If the selection is active the device will not answer any incoming calls. All calls will be
forwarded to Voice-mail or to the selected Forwarding Number.
Enable Call Waiting This option allows the Call Wait function to be disabled. If
disabled, the user will not be able to hear a sound notification if there is a second call on the line and view
the CallerID details of the second caller on the LCD screen.
Enable Auto Redial This function allows the last number to be redialed automatically
if the initial dial attempt returns a busy answer. The device will automatically redial every 10 seconds the
last number until it is hung up or the number answers the call.
Enable Minute Reminder This function will produce a beep sound 10 seconds before the
each minute ends. The function allows the users to control their billable time.
PBX Server IP Address This function allows PLAR support. The device will first connect
to this server and then dials the selected numbers. The PBX DTMF commands are entered directly after
the Feature button is pressed.
CID Black List This is the Called ID black list. The numbers that the device must
reject calls from are entered in this field separated by ','.
Enable Outbound Ring Tone This option will enable ring tones while dialing out.
CID Announcement Ringing This option will make the system state the caller id via voice IVR
while there is an inbound call ring.
5.1.19. Voice-mail Configuration
Depending on the model of TORNADO purchased, the Voice-mail Configuration function may not be
apply. TORNADO can support advanced Voice-mail functionality to allow independent Voice-mail
feature support that does not rely on external Voice-mail servers. The web interface shown in the image
below allows advanced management of this functionality.
To Next Page
Loading...
Need help?
General