72
Delete File Pressing the DELETE button the users can delete the existing ring tone.
5.1.21. History List
Depending on the model of TORNADO purchased, the Call History feature may not be available.
TORNADO can support advanced Call History List that displays all dialed numbers, received inbound
calls and viewed content objects. This is a View-Only form. If the Caller ID button is pressed, the system
will open the Phone Book Entry dialog to allow the proper contact information to be modified and stored
as a Phone Book Entry. Click on the left end of the line to open the Call History Configuration dialog.
5.1.22. Announcement Files Configuration
Depending on the model of TORNADO purchased, the Announcement function may not be available.
TORNADO can support advanced Announcement File management functionality to allow multilanguage
support and easy customization for the IVR files in the system. Users can record their own files in 8-bits,
8000Hz, Mono, Nextsun PCM Mu-law format with *.au extension. Once recorded the files can be
uploaded and will be permanently stored in the IVR system. The Voice-mail Announcement Files are
managed via the Web. The menu will allow UPLOAD and DOWNLOAD of pre-recorded audio files to
create custom IVR environment.
5.1.23. Calling Card Application Mode
Depending on the model of TORNADO purchased, the Calling Card function may not be available.
TORNADO can support advanced Calling Card functionality to allow easy and fully automated
calling card function suitable for automated call shop and other pre-paid device applications. Using the
below form administrators can enable the Calling Card mode of the device. Once the Calling Card mode is
enabled the subscribers will need to enter a PIN code to authenticate before they can dial any number.
Radius Authentication, Authorization, and Accounting (AAA) is done automatically utilizing a VoIP
billing server such as the VoiceMaster server. The administrator must check the Enable Calling Card
checkbox, enter the IP address of the Billing server into the Calling Card Server text box, and then press
the SAVE button. Once the SAVE button is pressed the system will start working in a Calling card mode.
To Next Page
Loading...
Need help?
General