Days of Week
By default, every day is an active watering day. To remove days
from the schedule, turn the Upper Line knob to select the day
indicator, then turn the Lower Line knob to replace the indicator
with a dash (as shown in the following example).
WATER DAY INTERVAL PGM A
01 (Everyday)
WATER DAY MODE PGM A
Days of Week
OK TO WATER ON PGM A
S M T W T F S
1. Turn the Lower Line knob to select Interval.
1. Turn the Lower Line knob to select Days of Week.
2.
3.
Turn the Upper Line knob to view the following display:
Interval
2. The default Interval is 01 which schedules every day as active.
To select an Interval from 02 – 30, turn the Lower Line knob.
:etoN The current day is the first active day of the Interval
schedule. For example, if today is Saturday and a 02 interval
(water every-other-day) is set, today will be active. The next
active watering day will be Monday.
To Next Page
Loading...
Need help?
General
