could be dang erous . Altering this spra yer in
any manner that ma y affect spra yer operation,
perfor mance , durability , or its use , ma y result
in injur y or death. Suc h use could v oid the
product w ar ranty .
Sound Pressure
T his unit has a maxim um sound pressure lev el
at the operator’ s ear of 82 dB A, based on
measurements of identical mac hines per EN
11094.
Vibration
T his unit does not ex ceed a hand/ar m vibration
lev el of 2.5 m/s
2
, based on measurements of
identical mac hines per EN 1033.
T his unit does not ex ceed a whole body vibration
lev el of 0.5 m/s
2
, based on measurements of
identical mac hines per EN 1032.
Safety and Instructional Decals
Safety decals and instr uctions are easily visible to the operator and are located near any
area of potential dang er . R e place any decal that is damag ed or lost.
104-7628
1. Read the Operator’s Manual.
100-8458
1. Machine speed
2. To set the machine to a slow speed, reduce pressure on the
accelerator and pull up on the speed limiter.
3. To set the machine to a fast speed, press the accelerator
pedal and push down on the speed limiter.
100-8619
1. Spray on
2. Spray off
100-8386
1. Fuel 3. Half-full
2. Empty
4. Full
8
To Next Page
Loading...
Need help?
General
