Toro Workman GTX Service Manual

Page 6 -- 32 Workman GTX GasolineChassis
Steering Rack Assembly Service
1. Tie rod end (2 used)
2. Jam nut (2 used)
3. Tie rod track (2 used)
4. Bellows clamp (2 used)
5. Bellows (2 used)
6. Bellows clamp (2 used)
7. Input shaft seal
8. Steering rack assembly
Figure 30
2
3
1
54
34 to 42 ft--lb
(47to57N--m)
45 to 50 ft--lb
(61to75N--m)
Medium Strength
Thread Locker
6
7
8
NOTE: Check parts catalog to identify individual com-
ponents that are available for the steering rack assem-
bly on your Workman GTX vehicle. Depending on wear
or damage that exists with the steering rack, replace-
ment of the complete steering rack assembly might be
necessary.

Toro Workman GTX Specifications

General

Brand	Toro
Model	Workman GTX
Category	Utility Vehicle
Language	English