Chapter
5:
Setting
up
your
TV
To manually
add
digital subchannels
on
a physical
channel:
Use the Channel Numbers and the Dash
(@)
on the remote
control to enter the channel number (for example,
56-I).
If
the channel
is
found, the number will be added to the list
and the box will be checked.
If
the channel
is
not found, a message will appear.
To remove a
channel
from the channel memory:
Highlight the checked box next to the channel number you
want to remove, and then press
8 to uncheck the box.
To
save
your
new settings:
Highlight
Done
and press
8.
To revert to
your
original settings:
Highlight
Cancel
and press 8 before saving.
To
remove all channels from the channel
memory:
Highlight
Reset
and press
8,
and then highlight
Done
and
press
8.
Note: A video preview
of
the currently highlighted channel
is
provided
to
assist you
in
adding/deleting channels.
To
remove
encrypted
channels from
the
channel
memory:
If
an encrypted channel
is
accidentally added to the channel
list by programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel
surfing. When you tune into an encrypted channel, the
following message will appear.
Digital
Channel
Is
Encrypted·
Press
1
on
remote
to
remove
channel
Press
en
while the message
is
on the screen to remove the
unnecessary channel from the channel list.
Labeling
channels
A list
of
common channel labels (logos) for various channels
(ABC, CBS, etc.) will be programmed into the
TV.
You
will
be able to view and assign these logos from the
Channel
Labeling
window.
If
the desired channel label
is
not provided
in
the list, you will be able to manually enter/edit labels using
the software keyboard.
To assign channel labels:
1 Press
M~U
and open the
Preferences
menu.
2 Highlight
Channel
Labeling
and press
8.
The
Channel
Labeling
window opens.
3 Press
fti;)
or
~
to select the channel you want to label.
4 Press
...
T
....
~
to highlight the desired channel label and
press
8.
5 Repeat steps 3 and 4 for other channels.
6
To
save your settings, highlight
Done
and press
8.
Channel Labeling
..
{No Label}
-
A&E
ABC
ABCFAM
PrellS
CH
UP/OOWN
to
changechanll8l.
ABCHD
AMAX
AMAXW
I
Custom
AMC
Clear All
•
ANIMAL
The
maximum number
of
labels that can be stored is 128.
To remove channel labels:
1 Open the
Channel
Labeling
window.
2 Press
fti;)
or
~
to select the channel for which you want
to remove the label.
3 Press
...
T
....
~
to highlight
No
Label
and press
8.
4 Repeat steps 2 and 3 for other channels.
5 To save your settings, highlight
Done
and press
8.
If
the desired channel label
is
not available from the list
of
presets, you can create a custom label.
(continued)
31
I
To Next Page
Loading...
Need help?
General
