Chapter
6:
Using
the
TV's
features
Adjusting
the
audio
Muting
the
sound
Press
M8
E
on the remote control to partially reduce (1/2 MUTE)
or turn off (MUTE) the sound. Each time you press
M8
E
,
the
mute mode will change
in
the following order:
C 1/2
Mute-+Mute-+
Volume-+~
If
the closed caption mode
is
set to
Off
when you select
"MUTE"
mode, the closed caption feature
is
automatically
activated
if
the TV program
is
Closed Captioned.
To
mute
the audio without automatically activating the closed caption
feature, use
~
to set the volume to
O.
See "Using the closed
caption mode"
(lIE page 42) for more information on closed
caption modes.
Using
the
digital
audio
selector
You
can use the Digital
Audio
Selector
to conveniently switch
between audio tracks on a digital channel (for those channels
that have multiple audio tracks). This temporarily overrides
the audio track chosen by the language option under
Audio
Setup
(lIE "Selecting stereo/SAP broadcasts" on page 43).
To use the digital audio selector:
1 Press
M~U
and open the
Audio
menu.
2 Highlight Digital
Audio
Selector
and press
@.
Audio
Digital Audio:s.leCtcir
Audio Settings
Audio Setup
3 Press ... or ... to select
Audio,
and then press
....
or
~
to
select the desired service.
4 Press
Eer
Selecting
stereo/SAP
broadcasts
The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
music,
or
other audio information (when provided
by
individual stations).
When the TV receives a stereo or SAP broadcast, the word
"STEREO" or "SAP" appears on-screen when
REOLL
is
pressed.
The
MTS feature
is
only available for analog signals on the
ANT/CABLE
input.
To listen to stereo sound:
1 Press
M~U
and open the
Audio
menu.
2 Highlight
Audio
Setup
and press @.
3 In the
MTS
field, select
Stereo.
4 To save the new settings, highlight
Done
and press @.
To
reset the settings to the factory defaults, highlight
Reset
and press @.
Note:
•
You
can typically leave the
TV
in
Stereo mode because
it will automatically output the type
of
sound being
broadcast (stereo or monaural).
•
If
the stereo sound
is
noisy, select
Mono
to reduce the
noise.
!
To
listen to
an
alternate
language on
an
ATSC digital
station (if available):
Highlight the
Language
field in step 3 above, and then press
,
....
or
~
to select the language you prefer.
To listen to a second audio
program
on
an
analog
station (if available):
Select
SAP
in
step 3 above.
Note:
• A
second
audio program (SAP) can
be
heard only on
those
TV
stations that offer
it.
For example, a station might
broadcast another language as a second audio program.
If you have SAP
on,
you will see the current program on the
screen
but
hear the other language instead
of
the programs
normal audio.
• Ifyou have SAP on
and
the station you are watching is
not broadcasting a
second
audio program, the stations
normal audio will
be
output. However, occasionally there
is
no
sound
at
all
in
SAP
mode.
If
this happens, set the MTS
feature to
Stereo
mode.
To Next Page
Loading...
Need help?
General
