Chapter
6:
Using
the
TV's
features
Blocking
channels
With the Channels Block feature, you can block specific
channels.
You
will not be able to tune blocked channels unless
you unlock them.
Unlocking
programs
temporarily
If
you try to tune the TV to a program that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:
To block channels:
Press ....... to highlight the channel you want to block
and press
@,
which puts an "X"
in
the box next to that
channel.
Description
Mode
ThiS
program exceeds the rating limit you set.
Push 'MUTE' to enter PIN.
2
3
4
You
can either temporarily unlock the program
or
select an
unlocked program
to watch.
You
can use the Input Lock feature to lock the video inputs
(VIDEO,
ColorStream
HD,
HDMI1,
HDMI2
and
PC)
and
channels 3 and 4.
You
will not be able to view the input sources
or
channels until you unlock the inputs.
To
temporarily
unlock
the
program:
Using
the
input
lock
feature
To lock/unlock
the
video inputs:
1 From the locks menu, Press
....
to display the PIN code
entering screen.
Enter your four-digit PIN code and press
@.
Press to highlight
Input
lock and press
~.
Press
or
....
to select the level
of
video input locking
you prefer, as described below.
1 Press
Mer
2 Enter your four-digit PIN code and press @. If the correct
code is entered, the program lock mode
is
released and
the normal picture appears. All locking is disabled until
the
TV
is turned off, and will be enabled when the TV is
turned on again.
Allow
All
Block
All
Cancel
Dono
"0
o
o
o
o
o
o
o
o
..
0 10
Channels Block
Locks
Enable Rating Blocking Off
Edit
Rating
Limits
ChannaIs
Block
Input Lock Off
Contont Panel Lock Off
GameTimer
Off
New PIN Code
Press
M8
u
and highlight the locks menu icon.
Press
....
to display the PIN code entering screen.
Enter your four-digit PIN code and press @
(1& page 45).
Press
....
to highlight
Channels
Block
and then press @
. A list
of
the channels available for that input will be
displayed along with the call letters for each channel, if
available.
5
4
1
2
3
6 Repeat step 5 for other channels you want to block.
7 Highlight
Done
and press @.
Video
Locks VIDEO,
ColorStream HO, HDMI I,
HDMI 2, and
Pc.
To
unblock
individual channels:
In step 5 above,
press'"
....
to highlight the channel you want
to unblock, press @ to remove the "X" from the box, highlight
Done
and press
@.
Video+
Locks VIDEO, ColorStream HD,
HDMI I, HOMI 2, PC and channels 3
and4.
• Select
Video+
if you play video
tapes via
an
ANT/CABLE
input.
To
block all channels
at
once:
Highlight
Block
All
in
step 5 on previous page and then
highlight
Done
and press
@.
5
Off
Press@.
Unlocks all video inputs and channels
3 and 4.
To
unblock
all locked channels
at
once:
Highlight
Allow
All
in
step 5 on previous page and then
highlight
Done
and press @.
47
I
To Next Page
Loading...
Need help?
General
