Chapter
6:
Using
the
TV's
features
Switching
between
two
channels
using
SurfLock™
The SurtLock™ feature temporarily "memorizes" one channel
to the
CH()TN button, so you can return to that channel quickly
from any other channel by pressing
CH()TN. To memorize a
channel to the
CH()TN button:
1 Tune the
TV
to the channel you want to program into the
CH()TN button.
2 Press and hold
CHON
for about 2 seconds until the message
"Memorized"
appears on-screen.
The
channel has been
programmed to the
CHON
button.
3 You can then change channels repeatedly, and when you
press
CHON,
the memorized channel will be tuned.
The
TV
will return to the memorized channel
one
time only.
Once
you press CH()TN and then change channels again, the
CH
RTN memory will
be
cleared and the button will function as
Channel Return, by switching back and forth between the
last two channels that are tuned.This feature also works for
external inputs.
Selecting
the
picture
size
You can view many program formats in a variety
of
picture
sizes-Natural,
TheaterWide 1, TheaterWide 2,
TheaterWide
3,
Full,
4:3
HD,
Native and Dot
by
Dot.(available
in
PC
Mode
Only)
Note:
The
"picture size" illustrations are examples only
The
format
of
the image (in
any
of
the picture sizes) will vary
depending on the format
of
the signal you are currently
watching. Select the picture size that displays the current
program the way that looks
best
to you.
You can save separate picture size preferences for each input
on your
TV.
To
select the picture size using the remote control:
1 Press
p,cc3lzE
on the remote control.
2 While the Picture Size screen is open, you can
do
one
of
the following to select the desired picture size:
• Repeatedly press
p,cc3lzE.
• Press the corresponding Number button
(0-6)
while the
Picture Size screen
is
open.
•
Press.A
or
~
while the Picture Size screen is open.
To
select the picture size using the menus:
1 Select Picture Size in the
Theater
Settings
menu.
2 Press
<lIIl
or
~
to select the desired picture size setting.
3 Highlight Done and press @.
, Note: Some
of
the picture sizes
may
not
be
available
depending on the receiving signal format (those will
be
"grayed out"
in
the
Picture
Size
screen)
Using these functions to change the picture size (i.e.,
changing the height/ width ratio) for any purpose other than
your private viewing may be prohibited under the Copyright
Laws of the United States and other countries, and may
subject you
to
civil and criminal liability.
Note: Ifyou select one
of
the TheaterWide® picture sizes, the
top
and
bottom edges
of
the picture (including subtitles or
captions)
may
be
hidden.
To
view the hidden edges, either
scroll the picture
(TheaterWide 2
and
3 only)
or
try viewing
the program
in
Full
or
Natural
picture size.
To Next Page
Loading...
Need help?
General
