129
Exploring Your Computer’s Features
Using an SD™ card
2 Locate the PC Card eject button.
3 Press the PC Card eject button once to pop it out slightly, and
push it in to remove the PC Card.
The PC Card ejects slightly from the slot.
4 Grasp the edges of the PC Card and slide it out of the slot.
(Sample Illustration) Removing a PC Card
Setting up a PC Card for your computer
Some PC Cards are ready to use as soon as you install them. Others,
such as hard disk cards, network cards, and SCSI adapters, may
need to be set up to work with your computer. To set up your PC
Card, refer to the documentation that came with the card or refer to
your operating system manual or online Help.
Using an SD
™
card
Your computer supports the use of an SD™ card. The card can be
used with a variety of digital products: digital music players,
cellular phones, PDAs, digital cameras, digital video camcorders,
etc.
Do not touch the SD connector. You could expose the storage area to
static electricity which can destroy data.
Do not remove an SD card while data is being written or read. Even
when the Windows
®
message “copying...” disappears, writing to the
card might still be in progress and your data could be destroyed.
Wait for the SD indicator light to go out.
PC Card
eject button
To Next Page
Loading...
Need help?
General