149
Utilities
TOSHIBA HDD Protection Utility
TOSHIBA HDD Protection Utility
(Available on certain models)
The TOSHIBA HDD Protection utility controls your computer’s
hard disk drive (HDD) protection feature, which parks the HDD
whenever motion is detected on the computer. Using this utility,
you can enable or disable hard disk drive (HDD) protection, and set
the motion detector’s sensitivity level for AC power and battery
power operation.
To use the TOSHIBA HDD Protection utility:
1 Click Start, All Programs, Tosh iba, Utilities, and then
HDD Protection, or click the HDD Protection icon in the
Protect & Fix tab of TOSHIBA Assist.
The TOSHIBA HDD Protection Properties window appears.
(Sample Image) TOSHIBA HDD Protection Properties window
2 Select ON to enable HDD protection, or select OFF to disable
HDD protection.
3 Set the battery and AC power detection levels as desired.
4 Click OK.
To Next Page
Loading...
Need help?
General