171
4
4-3. Operating the lights and wipers
Driving
1 With the headlights on, push the
lever away from you to turn on
the high beams.
Pull the lever toward you to the center
position to turn the high beams off.
2 Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams with the
headlights on or off.
*
: If equipped
1 Press the Automatic High Beam
switch.
2 Push the lever away from you
with the headlight switch in the
or position.
Turning on the high beam
headlights
Automatic High Beam
*
The Automatic High Beam
uses an in-vehicle camera sen-
sor to assess the brightness of
streetlights, the lights of vehi-
cles ahead etc., and automati-
cally turns the high beam on or
off as necessary.
â– Limitations of the Automatic
High Beam
Do not overly rely on the Automatic
High Beam. Always drive safely, tak-
ing care to observe your surroundings
and turning the high beam on or off
manually if necessary.
â– To prevent incorrect operation of
the Automatic High Beam system
Do not overload the vehicle.
Activating the Automatic
High Beam system
To Next Page
Loading...
Need help?
General
