235
4
4-5. Using the driving support systems
Driving
once to deactivate the system, and then
press the switch again to reactivate the
system.
If the cruise control speed cannot be set
or if the cruise control cancels immedi-
ately after being activated, there may be
a malfunction in the cruise control sys-
tem. Have the vehicle inspected by your
Toyota dealer.
*
: If equipped
BSM (Blind Spot Moni-
tor)
*
The Blind Spot Monitor is a
system that has 2 functions:
The BSM (Blind Spot Monitor)
function
Assists the driver in making a
decision when changing lanes
The RCTA (Rear Cross Traffic
Alert) function (if equipped)
Assists the driver when backing
up
These functions use the same
sensors.
■ Cautions regarding the use of
the BSM function
The driver is solely responsible for
safe driving. Always drive safely, tak-
ing care to observe your surround-
ings.
The BSM function is a supplementary
function which alerts the driver that a
vehicle is in a blind spot of the outside
rear view mirrors or is approaching
rapidly from behind into a blind spot.
Do not overly rely on the BSM func-
tion. As the function cannot judge if it
is safe to change lanes, over reliance
could lead to an accident resulting in
death or serious injury.
As the system may not function cor-
rectly under certain conditions, the
driver’s own visual confirmation of
safety is necessary.
To Next Page
Loading...
Need help?
General
