341
6
6-3. Do-it-yourself maintenance
Maintenance and care
■ If the key battery is depleted
The following symptoms may occur:
● The smart entry & start system (if
equipped) and wireless remote control
will not function properly.
● The operational range will be reduced.
Prepare the following before replac-
ing the battery:
Flathead screwdriver
Small flathead screwdriver
Lithium battery CR2032
■ Use a CR2032 lithium battery
● Batteries can be purchased at your
Toyota dealer, local electrical appli-
ance shops or camera stores.
● Replace only with the same or equiva-
lent type recommended by the manu-
facturer.
● Dispose of used batteries according to
the local laws.
Vehicles without smart entry &
start system
1 Remove the cover.
Use a screwdriver of an appropriate
size. Forcedly prying may cause the
cover damaged.
To prevent damage to the key, cover
the tip of the screwdriver with a rag.
2 Remove the battery cover.
If the battery cover is difficult to remove,
lift the edge to remove it.
3 Remove the depleted battery.
When removing the battery, use a
screwdriver of an appropriate size.
Insert a new battery with the “+” termi-
nal facing up.
4 Install the battery cover with the
tab facing up.
Push the entire edge of the battery
Wireless remote con-
trol/electronic key bat-
tery
Replace the battery with a new
one if it is depleted.
Items to prepare
Replacing the battery
To Next Page
Loading...
Need help?
General
