243
4
4-5. Using the driving support systems
Driving
• Immediately after the RCTA function
is turned on
• Immediately after the engine is started
with the RCTA function on
• When towing a trailer
• When the sensors cannot detect a
vehicle due to obstructions
● Instances of the RCTA function
unnecessary detecting a vehicle
and/or object may increase in the fol-
lowing situations:
• When a vehicle passes by the side of
your vehicle
• When the parking space faces a street
and vehicles are being driven on the
street
• When the distance between your vehi-
cle and metal objects, such as a
guardrail, wall, sigh, or parked vehicle,
which may reflect electrical waves
toward the rear of the vehicle, is short
• When an accessory (such as a bicycle
carrier) is installed to the rear of the
vehicle
■ Location and types of sensors
Front corner sensors
Front center sensors
Rear corner sensors
Rear center sensors
■ Display (Multi-information dis-
play)
When the sensors detect an object,
such as a wall, a graphic is shown
on the multi-information display
depending on the position and dis-
tance to the object.
Toyota parking assist-
sensor
The distance from your vehicle
to objects, such as a wall,
when parallel parking or
maneuvering into a garage is
measured by the sensors and
communicated via the naviga-
tion system or multimedia sys-
tem screen and a buzzer.
Always check the surrounding
area when using this system.
System components
A
B
C
D
To Next Page
Loading...
Need help?
General
