322
6-3. Do-it-yourself maintenance
1 Pull the hood lock release lever.
The hood will pop up slightly.
2 Push the auxiliary catch lever to
the left and lift the hood.
3 Hold the hood open by inserting
the supporting rod into the slot.
Hood
Release the lock from the
inside of the vehicle to open
the hood.
Opening the hood
â– Pre-driving check
Check that the hood is fully closed
and locked.
If the hood is not locked properly, it
may open while the vehicle is in
motion and cause an accident, which
may result in death or serious injury.
â– After installing the support rod
into the slot
Make sure the rod supports the hood
securely from falling down on to your
head or body.
â– When closing the hood
When closing the hood, take extra
care to prevent your fingers etc. from
being caught.
To Next Page
Loading...
Need help?
General
