TP-Link AX5400 User Manual

98
Chapter 15
Customize Your Network Settings
4. Select the Static LAG or LACP mode. It’s recommended that you select the same link
aggregation mode for both ends of the link.
5. Click SAVE. The LAN2 and LAN3 ports will be used for Link Aggregation.
15. 3. Configure to Support IPTV Service
I want to:
Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet
service provider (ISP).
How can I do that?
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > Network > IPTV/VLAN.
3. If your ISP provides the networking service based on IGMP technology, e.g., British
Telecom(BT) and Talk Talk in UK:
1 ) Tick the IGMP Proxy and IGMP Snooping checkbox, then select the IGMP Version,
either V2 or V3, as required by your ISP.
2 ) Click SAVE.
3 ) After configuring IGMP proxy, IPTV can work behind your router now. You can
connect your set-top box to any of the router’s Ethernet port.

TP-Link AX5400 Specifications

General

Model	Archer AX73
Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Bands	Dual-Band
Maximum Speed	5400 Mbps
2.4 GHz Speed	574 Mbps
5 GHz Speed	4804 Mbps
Frequency	2.4 GHz and 5 GHz
Antenna	6x External Antennas
Processor	1.5 GHz Triple-Core CPU
Ports	1x Gigabit WAN, 4x Gigabit LAN, 1x USB 3.0
Security	WPA3, WPA2
Features	OFDMA, MU-MIMO, Beamforming
Memory	512 MB RAM