TP-Link AX5400 User Manual

69
Chapter 12
Network Security
To bind the unconnected device:
1 ) Click
in the Binding List section.
2 ) Enter the MAC Address and IP Address that you want to bind.
3 ) Click SAVE.
Done!
Now you don’t need to worry about ARP spoofing and ARP attacks!
12. 4. ALG
ALG allows customized NAT traversal filters to be plugged into the gateway to support
address and port translation for certain application layer “control/data” protocols such
as FTP, TFTP, H323 etc. It is recommended to keep the default settings.
You may need to disable SIP ALG when you are using voice and video applications to
create and accept a call through the router, since some voice and video communication
applications do not work well with SIP ALG.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > Security > ALG.

TP-Link AX5400 Specifications

General

Model	Archer AX73
Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Bands	Dual-Band
Maximum Speed	5400 Mbps
2.4 GHz Speed	574 Mbps
5 GHz Speed	4804 Mbps
Frequency	2.4 GHz and 5 GHz
Antenna	6x External Antennas
Processor	1.5 GHz Triple-Core CPU
Ports	1x Gigabit WAN, 4x Gigabit LAN, 1x USB 3.0
Security	WPA3, WPA2
Features	OFDMA, MU-MIMO, Beamforming
Memory	512 MB RAM