EasyManuals Logo

TP-Link Omada EAP230-Wall User Manual

TP-Link Omada EAP230-Wall
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #102 background imageLoading...
Page #102 background image
98
Configure Daylight Saving Time
Daylight saving time is the practice of advancing clocks during summer months so that
evening daylight lasts longer, while sacrificing normal sunrise times. The EAP provides
daylight saving time configuration.
Follow the steps below to configure daylight saving time:
1. Check the box to enable Daylight Saving.
2. Select the mode of daylight saving time. Three modes are available: Predefined Mode,
Recurring Mode and Date Mode.
3. Configure the related parameters of the selected mode.
Predefined Mode
If you select Predefined Mode, choose your region from the drop-down list and the EAP
will use the predefined daylight saving time of the selected region.
There are four regions provided: USA, European, Austrilia and New Zealand. The
following table introduces the predefined daylight saving time of each region.
USA From 2: 00 a.m. on the Second Sunday in March to 2:00 a.m. on the First
Sunday in November.
European From 1: 00 a.m. on the Last Sunday in March to 1:00 a.m. on the Last
Sunday in October.
Australia From 2:00 a.m. on the First Sunday in October to 3:00 a.m. on the First
Sunday in April.
New Zealand From 2: 00 a.m. on the Last Sunday in September to 3:00 a.m. on the
First Sunday in April.

Table of Contents

Other manuals for TP-Link Omada EAP230-Wall

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link Omada EAP230-Wall and is the answer not in the manual?

TP-Link Omada EAP230-Wall Specifications

General IconGeneral
2.4 GHzYes
MIMO typeMulti User MIMO
Frequency band2.4 - 5 GHz
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at
Virtual LAN featuresPort-based VLAN, VLAN mapping
Ethernet LAN data rates10, 100, 1000 Mbit/s
Transmitting power (CE)20 - 23 dBm
Maximum data transfer rate1167 Mbit/s
Maximum data transfer rate (5 GHz)867 Mbit/s
Maximum data transfer rate (2.4 GHz)300 Mbit/s
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Compatible operating systemsMicrosoft Windows XP, Vista, Windows 7, Windows 8, Windows10
Number of products included2 pc(s)
Security algorithms64-bit WEP, 128-bit WEP, 152-bit WEP, SNMP, SNMPv2, WPA, WPA-PSK, WPA2-Enterprise, WPA2-PSK
Number of SSID supported16
Service Set Identifier (SSID) featuresMultiple SSIDs
PlacementWall
Product colorWhite
LED indicatorsOperation
Antenna typeInternal
Antenna featuresIntegrated antenna
Antennas quantity2
Antenna gain level (max)3.6 dBi
Power consumption (max)25.5 W
Power consumption (typical)9 W
WAN connectionEthernet (RJ-45)
USB 2.0 ports quantity-
Ethernet LAN (RJ-45) ports1
Harmonized System (HS) code85176990
Package depth130 mm
Package width118 mm
Package height47 mm
Package weight210 g
Sustainability certificatesCE, RoHS
Weight and Dimensions IconWeight and Dimensions
Width86.8 mm
Height30.2 mm

Related product manuals