EasyManuals Logo

TP-Link Omada EAP230-Wall User Manual

TP-Link Omada EAP230-Wall
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
87
4.8 Configure SSH
If you want to remotely log in to the EAP via SSH, you can deploy an SSH server on your
network and configure the SSH feature on the EAP.
To configure SSH, go to the Management > SSH page.
Follow the steps below to configure SSH on this page:
1. Refer to the following table to configure the parameters:
Server Port Designate a server port for SSH. By default the port is 22.
Layer-3
Accessibility
With this feature enabled, devices from a different subnet can access
Omada managed devices via SSH. With this feature disabled, only the
devices in the same subnet can access Omada managed devices via
SSH.
SSH Login Enable or disable SSH Login globally.
2. Click Save.

Table of Contents

Other manuals for TP-Link Omada EAP230-Wall

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link Omada EAP230-Wall and is the answer not in the manual?

TP-Link Omada EAP230-Wall Specifications

General IconGeneral
2.4 GHzYes
MIMO typeMulti User MIMO
Frequency band2.4 - 5 GHz
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at
Virtual LAN featuresPort-based VLAN, VLAN mapping
Ethernet LAN data rates10, 100, 1000 Mbit/s
Transmitting power (CE)20 - 23 dBm
Maximum data transfer rate1167 Mbit/s
Maximum data transfer rate (5 GHz)867 Mbit/s
Maximum data transfer rate (2.4 GHz)300 Mbit/s
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Compatible operating systemsMicrosoft Windows XP, Vista, Windows 7, Windows 8, Windows10
Number of products included2 pc(s)
Security algorithms64-bit WEP, 128-bit WEP, 152-bit WEP, SNMP, SNMPv2, WPA, WPA-PSK, WPA2-Enterprise, WPA2-PSK
Number of SSID supported16
Service Set Identifier (SSID) featuresMultiple SSIDs
PlacementWall
Product colorWhite
LED indicatorsOperation
Antenna typeInternal
Antenna featuresIntegrated antenna
Antennas quantity2
Antenna gain level (max)3.6 dBi
Power consumption (max)25.5 W
Power consumption (typical)9 W
WAN connectionEthernet (RJ-45)
USB 2.0 ports quantity-
Ethernet LAN (RJ-45) ports1
Harmonized System (HS) code85176990
Package depth130 mm
Package width118 mm
Package height47 mm
Package weight210 g
Sustainability certificatesCE, RoHS
Weight and Dimensions IconWeight and Dimensions
Width86.8 mm
Height30.2 mm

Related product manuals