TP-Link Omada EAP245 User Manual (English)

To Next Page

To Previous Page

2. Click to add a new SSID on the chosen band.

Tips:

You can also click to edit the specific SSID which already exists in the list. And you can click

to delete the SSID in the list.

3. Configure the following required parameters for this SSID:

SSID Specify a name for the wireless network.

SSID Broadcast With the option enabled, EAP will broadcast the SSID to the nearby

hosts, so that those hosts can find the wireless network identified by

this SSID. If this option is disabled, users must enter the SSID manually

to connect to the EAP.

Security Mode Select the security mode of the wireless network. There are four

options:

None

: Clients can access the wireless network without authentication.

WEP

WPA-Enterprise

WAP-Personal

: Clients need to pass the

authentication before accessing the wireless network.

For 6GHz:

Enhanced Open

: Enhanced Open is a Wi-Fi Alliance certification that

preserves the convenience open networks offer while reducing some of

the risks associated with accessing an unsecured network.

WPA3-Enterprise

WAP3-Personal

: Clients need to pass the

authentication before accessing the wireless network.

For network security, we recommend that you encrypt your wireless

network. The following sections will introduce how to configure these

security modes.

Guest Network With this option enabled, guest network will block clients from reaching

any private IP subnet.

Rate Limit With this option enabled, the download and upload rate of each client

which connects to the SSID will be limited to balance bandwidth usage.

You can limit the download and upload rate for some specific clients by

configuring rate limit in client list, refer to

View Client Information

get more details.

Note that the download and upload rate will be limited to the smaller

value if you set the limit value both in SSID and client configuration.

4. Click OK to create the SSID.

Following is the detailed instructions about how to configure

WEP

WPA-Enterprise

WPA-

Personal

WPA3-Enterprise

, and

WAP3-Personal

Other manuals for TP-Link Omada EAP245

Quick Installation Guide11 pages

Need help?

Do you have a question about the TP-Link Omada EAP245 and is the answer not in the manual?

TP-Link Omada EAP245 Specifications

General

5 GHz	Yes
MIMO type	Multi User MIMO
Frequency band	2.4 - 5 GHz
Cabling technology	10/100/1000Base-T(X)
Transmitting power	27 dBmW
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1x, IEEE 802.3af
Virtual LAN features	SSID-based VLAN assignment
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Transmitting power (CE)	20 - 23 dBm
Transmitting power (FCC)	24 dBm
Maximum data transfer rate	1750 Mbit/s
Maximum data transfer rate (5 GHz)	1300 Mbit/s
Maximum data transfer rate (2.4 GHz)	450 Mbit/s
Placement	Ceiling, Wall
Product color	White
LED indicators	Power
Cable lock slot type	Kensington
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	2
Security algorithms	64-bit WEP, 128-bit WEP, 152-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Number of SSID supported	16
Service Set Identifier (SSID) features	Multiple SSIDs
Compatible operating systems	Microsoft Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Antenna type	Internal
Antenna features	Integrated antenna
Antenna direction type	Omni-directional
Antenna gain level (max)	4 dBi
Output current	1.5 A
Output voltage	12 V
Power consumption (typical)	12.7 W
Power over Ethernet (PoE) type supported	Active PoE, Passive PoE
Cables included	AC
Number of products included	1 pc(s)
Package depth	340 mm
Package width	228 mm
Package height	65 mm
Package weight	1180 g
Harmonized System (HS) code	85176990
Sustainability certificates	CE, Federal Communications Commission (FCC), RoHS