EasyManuals Logo
Home>TP-Link>Wireless Access Point>Omada EAP245

TP-Link Omada EAP245 User Manual

TP-Link Omada EAP245
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
37
2.1.3  Configure the MLO Network (Only for Wi-Fi 7 Devices)
MLO (Multi-Link Operation) enables Wi-Fi 7 devices to simultaneously send and receive
data across different bands and channels. This ensures fast and reliable connections even
in dense network environments.
To configure an MLO network, go to Wireless > Wireless Settings > MLO and click Add.
Configure the parameters and save the settings.
SSID Specify a name for the MLO network.
Band Select the bands to form the MLO network. Available band options may
vary by model.
SSID Broadcast With the option enabled, AP will broadcast the SSID to the nearby hosts,
so that those hosts can find the wireless network identified by this SSID.
If this option is disabled, users must enter the SSID manually to connect
to the AP.
Security Mode/
Version/
Encryption
Configure the security settings of the wireless network.
For detailed instructions, refer to
2.1.1 Configure SSIDs
.
Guest Network With this option enabled, guest network will block clients from reaching
any private IP subnet.

Table of Contents

Other manuals for TP-Link Omada EAP245

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link Omada EAP245 and is the answer not in the manual?

TP-Link Omada EAP245 Specifications

General IconGeneral
5 GHzYes
MIMO typeMulti User MIMO
Frequency band2.4 - 5 GHz
Cabling technology10/100/1000Base-T(X)
Transmitting power27 dBmW
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1x, IEEE 802.3af
Virtual LAN featuresSSID-based VLAN assignment
Ethernet LAN data rates10, 100, 1000 Mbit/s
Transmitting power (CE)20 - 23 dBm
Transmitting power (FCC)24 dBm
Maximum data transfer rate1750 Mbit/s
Maximum data transfer rate (5 GHz)1300 Mbit/s
Maximum data transfer rate (2.4 GHz)450 Mbit/s
PlacementCeiling, Wall
Product colorWhite
LED indicatorsPower
Cable lock slot typeKensington
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports2
Security algorithms64-bit WEP, 128-bit WEP, 152-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Number of SSID supported16
Service Set Identifier (SSID) featuresMultiple SSIDs
Compatible operating systemsMicrosoft Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Antenna typeInternal
Antenna featuresIntegrated antenna
Antenna direction typeOmni-directional
Antenna gain level (max)4 dBi
Output current1.5 A
Output voltage12 V
Power consumption (typical)12.7 W
Power over Ethernet (PoE) type supportedActive PoE, Passive PoE
Cables includedAC
Number of products included1 pc(s)
Package depth340 mm
Package width228 mm
Package height65 mm
Package weight1180 g
Harmonized System (HS) code85176990
Sustainability certificatesCE, Federal Communications Commission (FCC), RoHS
Weight and Dimensions IconWeight and Dimensions
Width180 mm
Height47.5 mm

Related product manuals