EasyManuals Logo
Home>TP-Link>Wireless Access Point>Omada EAP245

TP-Link Omada EAP245 User Manual

TP-Link Omada EAP245
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
32
WPA3-Personal (for certain models)
WPA-Personal is based on a pre-shared key. It is characterized by high safety and simple
settings, so it is mostly used by common households and small businesses.
The following table introduces how to configure each item:
Wireless
Password
Configure the wireless password with ASCII characters.
For ASCII, the length should be between 8 and 63 and the valid characters
contain numbers, letters (case-sensitive) and common punctuations.
Group Key
Update Period
Specify an update period of the encryption key. The update period instructs
how often the AP should change the encryption key. 0 means that the
encryption key does not change at anytime.
2.1.2  Configure Wireless Advanced Settings
Proper wireless parameters can improve the performance of your wireless network.
This section introduces how to configure the advanced wireless parameters of the EAP,
including
Radio Setting
,
Load Balance
,
Airtime Fairness
and
More Settings
.
Radio Setting
Radio settings directly control the behavior of the radio in the EAP and its interaction with
the physical medium; that is, how and what type of signal the EAP emits.

Table of Contents

Other manuals for TP-Link Omada EAP245

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link Omada EAP245 and is the answer not in the manual?

TP-Link Omada EAP245 Specifications

General IconGeneral
5 GHzYes
MIMO typeMulti User MIMO
Frequency band2.4 - 5 GHz
Cabling technology10/100/1000Base-T(X)
Transmitting power27 dBmW
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1x, IEEE 802.3af
Virtual LAN featuresSSID-based VLAN assignment
Ethernet LAN data rates10, 100, 1000 Mbit/s
Transmitting power (CE)20 - 23 dBm
Transmitting power (FCC)24 dBm
Maximum data transfer rate1750 Mbit/s
Maximum data transfer rate (5 GHz)1300 Mbit/s
Maximum data transfer rate (2.4 GHz)450 Mbit/s
PlacementCeiling, Wall
Product colorWhite
LED indicatorsPower
Cable lock slot typeKensington
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports2
Security algorithms64-bit WEP, 128-bit WEP, 152-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Number of SSID supported16
Service Set Identifier (SSID) featuresMultiple SSIDs
Compatible operating systemsMicrosoft Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Antenna typeInternal
Antenna featuresIntegrated antenna
Antenna direction typeOmni-directional
Antenna gain level (max)4 dBi
Output current1.5 A
Output voltage12 V
Power consumption (typical)12.7 W
Power over Ethernet (PoE) type supportedActive PoE, Passive PoE
Cables includedAC
Number of products included1 pc(s)
Package depth340 mm
Package width228 mm
Package height65 mm
Package weight1180 g
Harmonized System (HS) code85176990
Sustainability certificatesCE, Federal Communications Commission (FCC), RoHS
Weight and Dimensions IconWeight and Dimensions
Width180 mm
Height47.5 mm

Related product manuals