EasyManuals Logo
Home>TP-Link>Wireless Access Point>Omada EAP245

TP-Link Omada EAP245 User Manual

TP-Link Omada EAP245
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
82
Configure the Way of Receiving Logs
In the Log Settings section, you can configure the ways of receiving system logs.
Follow the steps below to configure this feature:
1. Check the corresponding box to enable one or more ways of receiving system logs,
and configure the related parameters. Two ways are available:
Auto Mail
and
Server
.
Auto Mail
If Auto Mail is configured, system logs will be sent to a specified mailbox. Check the box
to enable the feature and configure the related parameters.
Note:
SSL encryption is not currently supported.
The following table introduces how to configure these parameters:
From Enter the sender’s E-mail address.
To Enter the receiver’s E-mail address.
SMTP Server Enter the IP address of the sender’s SMTP server.
Note:
At present, the domain name of SMTP server is not supported in
this field.
Enable
Authentication
If the sender’s mailbox is configured with You can check the box to
enable mail server authentication. Enter the sender’s username and
password.

Table of Contents

Other manuals for TP-Link Omada EAP245

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link Omada EAP245 and is the answer not in the manual?

TP-Link Omada EAP245 Specifications

General IconGeneral
5 GHzYes
MIMO typeMulti User MIMO
Frequency band2.4 - 5 GHz
Cabling technology10/100/1000Base-T(X)
Transmitting power27 dBmW
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1x, IEEE 802.3af
Virtual LAN featuresSSID-based VLAN assignment
Ethernet LAN data rates10, 100, 1000 Mbit/s
Transmitting power (CE)20 - 23 dBm
Transmitting power (FCC)24 dBm
Maximum data transfer rate1750 Mbit/s
Maximum data transfer rate (5 GHz)1300 Mbit/s
Maximum data transfer rate (2.4 GHz)450 Mbit/s
PlacementCeiling, Wall
Product colorWhite
LED indicatorsPower
Cable lock slot typeKensington
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports2
Security algorithms64-bit WEP, 128-bit WEP, 152-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Number of SSID supported16
Service Set Identifier (SSID) featuresMultiple SSIDs
Compatible operating systemsMicrosoft Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Antenna typeInternal
Antenna featuresIntegrated antenna
Antenna direction typeOmni-directional
Antenna gain level (max)4 dBi
Output current1.5 A
Output voltage12 V
Power consumption (typical)12.7 W
Power over Ethernet (PoE) type supportedActive PoE, Passive PoE
Cables includedAC
Number of products included1 pc(s)
Package depth340 mm
Package width228 mm
Package height65 mm
Package weight1180 g
Harmonized System (HS) code85176990
Sustainability certificatesCE, Federal Communications Commission (FCC), RoHS
Weight and Dimensions IconWeight and Dimensions
Width180 mm
Height47.5 mm

Related product manuals